Author: Ian Grigg
Creation date: 2008-05-30
Status: WIP 2008-05-30
Next status: DRAFT June 2008
Definitions of terms:
Each assurance claims a number of Assurance Points, applied to the assured Member or Member prospect. By combining the assurances, and the Assurance Points, CAcert constructs a global Web of Trust ("WoT").
CAcert explicitly chooses to meet its various goals by construction of a web-of-trust of all Members. This is done by face-to-face meeting, identifying and sharing claims in a network. Maintaining a sufficient strength for the web-of-trust is a high-level objective of the Assurance process.
Documentation on Assurance is split between this Assurance Policy (AP)
and the Assurance
Handbook.
The policy is controlled by Configuration Control Specification (CCS) under Policy on Policy (PoP) policy documents.
Because Assurance is an active area, much of the practice is handed
over to the Assurance Handbook, which is not a controlled document, and
can more easily respond to experience and circumstances.
It is also more readable.
See also Organisation Assurance Policy (OAP) and CAcert Policy Statement (CPS).
The purpose of Assurance is to add confidence in the Assurance Statement made of a Member by the CAcert Community.
The following claims can be made about a person who is assured:
The confidence level of the Assurance Statement is expressed by the Assurance Points.
The primary goal of the Assurance Statement is to meet the needs of the Relying Party Statement, which latter is found in the Certification Practice Statement (CPS) for the express purpose of certificates.
When a certificate is issued, some or all of the Assurance Statement may be incorporated (e.g., name) or implied (e.g., Membership or status) into the certificate and be part of the Relying Party Statement. In short, this means that other Members of the Community may rely on the information verified by Assurance and found in the certificate.
In particular, certificates are sometimes considered to provide reliable indications of the Member's Name. The nature of Assurance, the number of Assurance Points, and other policies and processes should be understood as limitations on any reliance.
The general standard is that the individual name of the Member is as written on a government-issued Identity (photo) document.
For more details see the Policy Drafts Policy On Names, where the discussion is carried on. This page will be copied into here when the discussion is complete.
The technical form of a Name is a string of characters. It should be exactly copied from a governemental-issued photo ID. Transliteration of characters to a character table defined by Assurance Officer is permitted.
Multiple NamesA Member has the following capabilities derived from Assurance:
Minimum Assurance Points | Capability | Comment |
0 | request un-named certificates | although the Member's details are recorded in the account, they are not highly assured. |
50 | request named certificates | the name and Assurance Statement is assured to 50 Assurance Points or more |
100 | become an Assurer | assured to 100 Assurance Points or more, and other requirements listed below |
The CAcert Policy Statement (CPS) and other policies may list other capabilities that rely on Assurance Points.
An Assurer is a Member with the following:
The Assurer Challenge is administered by the Education Team on behalf of the Assurance Officer.
The Assurer is obliged to:
Be guided by the Assurance Handbook in their judgement;
The Assurer conducts the process of Assurance with each Member.
The process consists of:
Mutual Assurance follows the principle of reciprocity. This means that the Assurance may be two-way, and that each member participating in the Assurance procedure should be able to show evidence of their identity to the other.
In the event that an Assurer is assured by a Member who is not certified as an Assurer, the Assurer supervises the Assurance procedure and process, and is responsible for the results.
Reciprocity maintains a balance between the (new) Member and the Assurer, and reduces any sense of power. It is also an important aid to the assurance training for future Assurers.
Evidence of Assurer status
On the question of providing evidence that one is an Assurer, CAcert
Policy Statement (CPS)
says: The level at which each Member is Assured is public
data. The number of Assurance Points for each Member is not published..
The Assurance applies Assurance Points to each Member which measure the increase of confidence in the Statement (above). Assurance Points should not be interpreted for any other purpose. Note that, even though they are sometimes referred to as Web-of-Trust (Assurance) Points, or Trust Points, the meaning of the word 'trust' is not well defined.
Assurance Points Allocation.
An Assurer can allocate a number of Assurance Points to the Member
according to the Assurer's experience (Experience Point system, see
below).
The allocation of the maximum means that the Assurer is 100% confident
in the information presented:
Any lesser confidence should result in less Assurance Points for a Name. If the Assurer has no confidence in the information presented, then zero Assurance Points may be allocated by the Assurer. For example, this may happen if the identity documents are totally unfamiliar to the Assurer. The number of Assurance Points from zero to maximum is guided by the Assurance Handbook and the judgement of the Assurer.
Multiple Names should be allocated separately in a single Assurance. That is, the Assurer may allocate the maximum to one Name, half that amount to another Name, and zero to a third Name.
A (new) Member who is not an Assurer may award an Assurer in a reciprocal process a maximum of 2 Assurance Points, according to his judgement. The Assurer should strive to have the Member allocate according to the Member's judgement, and stay on the cautious side; a (new) Member new to the assurance process should allocate zero Assurance Points until they get some confidence in what is happening.
No Assurance process can give more than 50 Assurance Points per Name. This means that to reach 50 Assurance Points (certificate with a Name), a Member must have been assured at least once. To reach 100 Assurance Points, at least one Name of the Member must have been assured at least twice.
The maximum number of Assurance Points that may be awarded by an Assurer is determined by the Experience Points of the Assurer.
Assurer's Experience Points | Allocatable Assurance Points |
0 | 10 |
10 | 15 |
20 | 20 |
30 | 25 |
40 | 30 |
>=50 | 35 |
An Assurer is given a maximum of 2 Experience Points for every completed Assurance. On reaching Assurer status, the Experience Points start at zero.
Less Experience Points (1) may be given for mass Assurance events, where each Assurance is quicker.
Additional Experience Points may be granted temporarily or permanently to an Assurer by CAcert Inc's Board, on recommendation from the Assurance Officer.
Experience Points are not to be confused with Assurance Points.
Comment: this part still needs to be agreed.
The CAcert Assurance Programme (CAP) form requests the following details of each Member or prospect Member:
The CAP forms are to be kept at least for 7 years by the Assurer.
The Commitee (Board) of CAcert Inc. appoints an Assurance Officer with the following responsibilities:
The Assurance Officer manages various exceptions and additional processes. Each must be covered by an approved Subsidiary Policy (refer to Policy on Policy => COD1). Subsidiary Policies specify any additional tests of knowledge required and variations to process and documentation, within the general standard stated here.
Examples of expected subsidiary policies are these:
Each Subsidiary Policy must augment and improve the general standards in this Assurance Policy. It is the responsibility of each Subsidiary Policy to describe how it maintains and improves the specific and overall goals. It must describe exceptions and potential areas of risk.
In addition to the Assurance or Experience Points ratings set here in and in other policies, Assurance Officer or policies can designate certain applications as high risk. If so, additional measures may be added to the Assurance process that specifically address the risks. These may include:
Additional Information is to be kept by Assurer, attached to CAP form. Assurance Points allocation by this assurance is unchanged. User's CAcert (web)account should be annotated to record type of additional information:
Applications that might attract additonal measures include code-signing certificates and administration roles.
CAcert is a "privacy" organisation, and takes the privacy of its Members seriously. The process maintains the security and privacy of both parties.
Information is collected primarily to make claims within the
certificates requested by users and to contact the Members.
It is used secondarily for training, testing, administration and other
internal purposes.
The Member's information can be accessed under these circumstances: