fix up xhtml anchours

git-svn-id: http://svn.cacert.org/CAcert/Policies@1874 14b1bab8-4ef6-0310-b690-991c95c89dfd

ConfigurationControlSpecification.html

@@ -82,11 +82,11 @@ DRC-A.1.
 CCS may be seen as the index to systems audit under DRC.
 </p>
 
-<h3> <a name="s2">2</a> <a name="Documents"> Documents </a> </h3>
+<h3 id="s2"> 2  Documents  </h3>
 
 <!-- A.1.c-h: The configuration-control specification controls the revision process for the CCS,CP,CPS,PP,SP,R/L/O  -->
 
-<h4> <a name="s2.1">2.1</a> <a name="doc_list"> Controlled Document List </a> </h4>
+<h4 id="s2.1">2.1  Controlled Document List  </h4>
 
 <p>
 This CCS creates a list of Primary or "root" documents known as Policies.
@@ -107,7 +107,7 @@ wiki.cacert.org/PolicyDecisions</a>.
 <!-- See A.1.k, logging of documents. -->
 </p>
 
-<h4> <a name="s2.2">2.2</a> <a name="doc_change"> Change </a> </h4>
+<h4 id="s2.2">2.2  Change  </h4>
 
 
 <p>
@@ -140,27 +140,27 @@ documents of higher status (DRAFT or POLICY).
 Copies should be eliminated where not being worked on.
 </p>
 
-<h4> <a name="s2.3">2.3</a> <a name="doc_control"> Control </a> </h4>
+<h4 id="s2.3">2.3  Control  </h4>
 
 <p>
 CAcert policies are required to be owned / transferred to CAcert. See PoP 6.2. 
 </p>
 
-<h3> <a name="s3">3</a> <a name="Hardware"> Hardware </a> </h3>
+<h3 id="s3"> 3  Hardware  </h3>
 
 <!-- This section from A.1.j -->
 
-<h4> <a name="s3.1">3.1</a> <a name="hard_list"> Controlled Hardware List </a> </h4>
+<h4 id="s3.1">3.1  Controlled Hardware List  </h4>
 
 <p>
 Critical systems are defined by Security Policy.
 </p>
 
-<h4> <a name="s3.2">3.2</a> <a name="hard_change"> Change </a> </h4>
+<h4 id="s3.2">3.2  Change  </h4>
 
 <p> See Security Policy.  </p>
 
-<h4> <a name="s3.3">3.3</a> <a name="hard_control"> Control </a> </h4>
+<h4 id="s3.3">3.3  Control  </h4>
 
 <p>
 Control of Hardware is the ultimate responsibility of the Board of CAcert Inc.
@@ -171,9 +171,9 @@ The ownership responsibility is delegated by agreement to Oophaga.
 </p>
 
 
-<h3> <a name="s4">4</a> <a name="Software"> Software </a> </h3>
+<h3 id="s4"> 4  Software  </h3>
 <!-- A.1.i: The configuration-control specification controls changes to software involved in: certs; data; comms to public -->
-<h4> <a name="s4.1">4.1</a> <a name="hard_list"> Controlled Software List </a> </h4>
+<h4 id="s4.1">4.1  Controlled Software List  </h4>
 
 <p>
 Critical software is defined by Security Policy.
@@ -187,11 +187,11 @@ Critical software is defined by Security Policy.
 <li> What is far more problematic is the failure to do CCA &amp; Challenge notification.</li>
 </ul>
 
-<h4> <a name="s4.2">4.2</a> <a name="soft_change"> Change </a> </h4>
+<h4 id="s4.2">4.2  Change  </h4>
 
 <p> See Security Policy.  </p>
 
-<h4> <a name="s4.3">4.3</a> <a name="soft_control"> Control </a> </h4>
+<h4 id="s4.3">4.3  Control  </h4>
 
 <p>
 CAcert owns its code, or requires control over open source code in use
@@ -225,17 +225,17 @@ and a registry of software under approved open source licences.
 
 
 
-<h3> <a name="s5">5</a> <a name="Certs"> Certificates </a> </h3>
+<h3 id="s5"> 5  Certificates  </h3>
 
 <!-- This section from A.1.b -->
 
 <p> This section applies to Root and Sub-root certificates, not to End-entity (subscriber, member) certificates. </p>
 
-<h4> <a name="s5.1">5.1</a> <a name="certs_list"> Certificates List </a> </h4>
+<h4 id="s5.1">5.1  Certificates List  </h4>
 
 <p> Certificates (Root and sub-root) are to be listed in the CPS.  </p>
 
-<h4> <a name="s5.2">5.2</a> <a name="logs_change"> Changes </a> </h4>
+<h4 id="s5.2">5.2  Changes  </h4>
 
 <p>
 Creation and handling of Certificates
@@ -244,37 +244,37 @@ Usage of Certificates
 is controlled by Certification Practice Statement.
 </p>
 
-<h4> <a name="s5.3">5.3</a> <a name="logs_archive"> Archive </a> </h4>
+<h4 id="s5.3">5.3  Archive  </h4>
 
 <p> See Security Policy. </p>
 
-<h3> <a name="s6">6</a> <a name="Logs"> Logs </a> </h3>
+<h3 id="s6"> 6  Logs  </h3>
 
 <!-- This section from A.1.k -->
 
-<h4> <a name="s6.1">6.1</a> <a name="logs_list"> Controlled Logs List </a> </h4>
+<h4 id="s6.1">6.1  Controlled Logs List  </h4>
 
 <p> Logs are defined by Security Policy.  </p>
 
-<h4> <a name="s6.2">6.2</a> <a name="logs_change"> Changes </a> </h4>
+<h4 id="s6.2">6.2  Changes  </h4>
 
 <p> Changes to Hardware, Software and Root Certificates are logged according to Security Policy.  </p>
 
-<h4> <a name="s6.3">6.3</a> <a name="logs_archive"> Archive </a> </h4>
+<h4 id="s6.3">6.3  Archive  </h4>
 
 <p> See Security Policy.  </p>
 
-<h3> <a name="s7">7</a> <a name="data"> Data </a> </h3>
+<h3 id="s7"> 7  Data  </h3>
 
 <!-- This section from A.1.i-j, bullets 2,3 -->
 
-<h4> <a name="s7.1">7.1</a> <a name="data_list"> Types of Data </a> </h4>
+<h4 id="s7.1">7.1  Types of Data  </h4>
 
 <p>
 Types of critical member data is defined by Assurance Policy.
 </p>
 
-<h4> <a name="s7.2">7.2</a> <a name="data_change"> Changes </a> </h4>
+<h4 id="s7.2">7.2  Changes  </h4>
 
 <p>
 Changes and access to critical member data
@@ -287,7 +287,7 @@ collection and storage of critical member data
 is defined by Security Policy.
 </p>
 
-<h4> <a name="s7.3">7.3</a> <a name="data_archive"> Archive </a> </h4>
+<h4 id="s7.3">7.3  Archive  </h4>
 
 <p> Data retention is controlled by Security Policy and CAcert Community Agreement.  </p>